国产精品毛片一区_91在线BD肛交中文_东京热一本到里综合不卡_2013国产在线看视频_欧美换爱交换乱中文字幕_777歐美午夜精品影院_久久久国产精品综合无人区_亚洲欧洲日韩在线成人观看_越猛烈欧美xx00动态图免费_亚洲成人无码观看电影

(1), in order to ensure the machining accuracy, rough, finishing the best separately. Because roughing, cutting a large amount of cutting force by the workpiece, clamping force, heat and more, and the processing of the surface there is more significant work hardening phenomenon, the workpiece there is a large internal stress, if the rough, roughing Continuously, the precision of the finished part is quickly lost due to the stress redistribution. For some high precision machining parts. After roughing and finishing, cryogenic annealing or aging treatments should also be arranged to eliminate the internal stresses.

(2), reasonable selection of equipment. Rough cutting is to cut off most of the machining allowance, does not require a higher machining accuracy, so the roughing should be larger, less accurate machine tool, finishing process requires a higher precision Machine tool processing. Coarse, finishing in different machine tools were processed, both to give full play to equipment capabilities, but also extend the life of precision machine tools.

(3), in the mechanical processing route, often arranged with heat treatment processes. Heat treatment process positions are as follows: In order to improve the metal cutting performance, such as annealing, normalizing, quenching and tempering, generally arranged before machining. In order to eliminate internal stress, such as aging, quenching and processing, generally arranged after roughing, finishing before. In order to improve the mechanical properties of parts, such as carburizing, quenching, tempering, etc., generally arranged after machining. If the heat treatment after a larger deformation, the final processing must be arranged.